Polished Chrome Metal Reflective Decals Stickers Graphics Badge Emblem Logo
• Note: The picture is taken with extreme close up to show details, please refer to measurements mentioned below.
Measurements: 39mm x 51mm x .01mm (Micro Thin)
• These decals are computed precision die-cut from high quality METAL, with no background and will come with application tape already applied.
• Simply remove the application tape / decal from the liner, apply, and then remove application tape.
• These will last for 7~10 years exposed to weather, and are water resistant (Rain proof)
• The decals are precision die-cut the white background pictured is the backing paper, not part of the decal.
• Decals can be applied to just about any smooth, clean surface. Can be used on cars, Jeeps, windows, motorcycles, interior walls, boats, planes, trains , toys bike gas tanks, fairings, helmets, windows - you name it! And will last for years!!
• Simply remove the application tape / decal from the liner, apply, and then remove application tape.
• The resulting badge is not more than 0.01 mm thick and comes with an aggressive high-tack pressure-sensitive adhesive.
• Withstands brushing off dirt and grime, and high pressure washing.
• Metal based film resists cracking & lifting.
• Unique, single-ply construction ensures impact & abrasion resistance and easy application
• Material is extremely thin so there are no raised edges that can catch and tear
• Application temperature: minimum 50°F.
Below is a simple decal/sticker installation guide. We only use clear application tape not paper. This helps you to see through the decal and makes it easy for you to see where exactly you will be sticking your sticker. Before you get started please make sure your surface is very clean. As a final cleaning process make sure you clean the surface with very warm water and a clean piece of cloth, wait for it to fully dry then you can get started. We use premium material and it can only stick to correctly painted surfaces or very clean surfaces. The material we use has proven itself in the hottest parts of the world.
Simple Application Techniques
1. Peel the backing plastic off which is the plastic underneath the
decal sticker not the top clear application tape.
2. Using a credit card or your finger slowly press the sticker borders and work out towards the surface removing any bubbles.
3. Next start removing the clear application tape. Make sure you pull back slowly and make sure the application tape is really close to the surface. If the application tape is being removed 30-40 degrees you may tear the sticker as this causes tension. As you remove the application tape if the decal starts to pull off stop and stick the decal on and then continue on.
|