T10 Wedge 14 SMD Light Replacement Bulb for Vehicles - (DC 12V)
It is 14 times as bright as a normal LED bulb
Voltage : 12V DC
Long Lifetime up to 50,000hours
Ultra bright power led.
Environmentally Friendly (Pb-free)
RoHS Compliant
Specification
Voltage: 12 D.C.
LED: Super High Power LED
Angle of Light Beam: 180°
Base: T10 with 14 SMD Bright Bulbs
Bulb Dimension: 11mm (Diameter) x 40mm Length
Competitive Advantages vs. Light bulb
-Power Saving.
-Long life span
-Low temperature in operation for long time
-High brightness
-“Green Products” to Environment, compose of reuse materials
Applications
-Indicating Lighting
-Instrumental Lighting
-Signal Lighting
-Decorative Lighting
-Automotive Interior Lighting
• The size of this LED bulb is 194, t10 or 501 which are all the same.
• The bulb is usually used as sidelight, interior light and license plate light.
• Built-in current limiting resistor and diode to protect the LED from reversed polarity + - installation.
• (If you insert them into the socket and they don't light, turn them oppositely and they will light.)
• 194 Standard size (194 Cross Reference: T10 W5W 158 168 147 152 159 161 184 192 193 901 904 912 916 917 918 920 921 922 923 926 927 and more)
• Low energy and help you save power supply.
• The bulb is made up of a quality plastic connector to slide right into the plug, as well as high durability terminals.
• A load resistor is embedded to prevent blowing the LED from voltage surge, and a diode is implanted to protect the LED from reverse polarity.
• The LED is wired for 12v operation, the kind found on all vehicles.
• Please read before buying!!
• Please note LED light bulbs are for modifications that will give a different effect, dimension, wattage, than the original light bulbs.
• It is the buyer's responsibility to confirm size and fitment before placing order.
• Please note many modern luxury car such as Mercedes Benz, BMW, Audi, … have sensors built into the electrical system that can detect burned out light bulbs. Since the LED light bulbs use a very lower wattage amp, this will cause the warning in the light bulb burned out alert on the dashboard.
• Please test your bulbs externally before installing.(you can use any 5V~14V adaptor to test)
• We will not be responsible for the problems after light bulbs have been installed onto the car.
|
